Maine Mud Mower's "Not the Norm" [2016 Build-Off Finalist]

AllisKidD21 wrote:

Doug Fackler wrote:

Rookin good Reel.

CraftsmanQuad19 wrote:: I stand corrected, thanks Doug!

Me and RCG talked a bit about it, I guess from what he told me the knuckles are integrated into the case BUT are held on with 4 bolts near the bullgear or something so could still be rotated.

Maine Mud Mower's "Not the Norm" [2016 Build-Off Finalist] - Page 3 Mtd_aw10

Maine Mud Mower's "Not the Norm" [2016 Build-Off Finalist] - Page 3 Mtd_aw10

I wonder if the gearing matches up with a regular transaxle?

Yeah! That's what I was trying to say, I figured the housings could be rotated 90 degrees to achieve proper steering.

Yeah I totally missed that. I had just assumed they were cast into the case. But when I assume, i make an ASS out of U or ME hehehe

I would like to ask everyone to please get back to the core of the build at hand. For now the only goal is a 2wd 3 speed with solid mount rear. To pull off anything more before the 30th would be total insanity...

Sorry for the thread jack, hehe.

"This'll either wake you up or put you to sleep forever!"- Red Green "Whatever you do you should do right, even if it's something wrong." - Hank Hill

----Uploading Pictures----

- MTD Off-Road Build
- Ford LT 110 Off-Road Build
- Craftsman GT 6000 Off-Road Build
- Sears LT11 Rat Rod Build *2019 Build-Off Winner!*

Garden Tractor Collection: Allis B-110 x2, 710, 716, & 410 - Wheel Horse 655, 953 & 500 Special - Case 444 - Bolens Versamatic, G10 & 1668 Diesel Swapped - Cub 106, 124 & 1000/149 Frankentractor - Ford 120, LGT 125 & 145 - White 1650 Yard Boss - Moto Mower 710-100

Looks great man! I am really enjoying the ingenuity of this project. Looking forward to your next update. Maine Mud Mower's "Not the Norm" [2016 Build-Off Finalist] - Page 3 2731072446

Maine Mud Mower's "Not the Norm" [2016 Build-Off Finalist] - Page 3 2731072446

	PROJECTS: Marshal ........93 Craftsman GT6000 Red Bandit ...72 Wheel Horse Raider 12 Dirty Rat........77 Sears Suburban Bowser..........01 Murray Widebody LT Other projects > > > ATLTF Staff < < < How To Upload Pictures Have a question? Ask me! Type in "@MightyRaze" in your post!

Looks cool on its four feet. Be sure you don't blow the FNR with that opposed twin man! Very Happy

MatthewD wrote:: Looks cool on its four feet. Be sure you don't blow the FNR with that opposed twin man!

Its the most beat and Junky one I have. It have another in way better condition but figured find the week points on a junk one first.

Yeah, maybe it might turn out to be stronger in that orientation. Who knows:)

I think it would be stronger because you really don't have the belt wanting to pull it to the side now. I think the next weak link will be the shaft itself.

Im willing to bed the input pinion strips too.

Head Forum Administrator ** Chat Moderator ** Facebook Page Admin
ATLTF Facebook Page ** Chatbox ** How To Upload Pictures

_X_ FORUM ANNOUNCEMENTS _X_

Have a question? Ask me! Type in "@Doug" in your post!

Your ATLTF Staff:
Administrators: @Doug, @MightyRaze, @"Doc Sprocket", @Stretch44875
Moderators: @TheRainbowBoxer, @AllisKidD21, @Brianator, @RichieRichOverdrive

Yeah or the splines might strip. MMM has entered unknown FNR territory lol (well, apart from his predator power wheels)

Mmm dat driveshaft. Looks great!

Head Forum Administrator ** Chat Moderator ** Facebook Page Admin
ATLTF Facebook Page ** Chatbox ** How To Upload Pictures

_X_ FORUM ANNOUNCEMENTS _X_

Have a question? Ask me! Type in "@Doug" in your post!

Your ATLTF Staff:
Administrators: @Doug, @MightyRaze, @"Doc Sprocket", @Stretch44875
Moderators: @TheRainbowBoxer, @AllisKidD21, @Brianator, @RichieRichOverdrive

Nice! Is it finished yet?

Gotta use a internal gear swapped 820 as your transfer case! That'll give you some better speed

Builds:
Craftsman- "MUTT" (part II) - "MUTT" (part I)
Craftsman GT6K
Wheel Horse 414-8 Build
MTD - "Budgie"
Lawn Ranger Foolishness

OOFTA MAY!

Maine Mud Mower's "Not the Norm" [2016 Build-Off Finalist] - Page 3 Rich1110

Probably be the best way to do it, unless you can modify the FNR to be closer to 1:1 final since thats what kills the speed.

Looks good Neil! Gave you an F.

Head Forum Administrator ** Chat Moderator ** Facebook Page Admin
ATLTF Facebook Page ** Chatbox ** How To Upload Pictures

_X_ FORUM ANNOUNCEMENTS _X_

Have a question? Ask me! Type in "@Doug" in your post!

Your ATLTF Staff:
Administrators: @Doug, @MightyRaze, @"Doc Sprocket", @Stretch44875
Moderators: @TheRainbowBoxer, @AllisKidD21, @Brianator, @RichieRichOverdrive

Shows promise. Got to take baby steps first.

Nice! It certainly is very unique Smile

Looking good! Will definitely follow after the contest to see how it goes!

	PROJECTS: Marshal ........93 Craftsman GT6000 Red Bandit ...72 Wheel Horse Raider 12 Dirty Rat........77 Sears Suburban Bowser..........01 Murray Widebody LT Other projects > > > ATLTF Staff < < < How To Upload Pictures Have a question? Ask me! Type in "@MightyRaze" in your post!

So the Goal after the build off will be to find a 4 inch trans pulley and relocate the clutch back 2 inches to allow a 7 to 8ish engine pulley. I might start with a 6 inch Engine and 4 inch trans first to cut down on the fab work needed to start.

Upgrading to 22 inch tires from the 18 on it now will help as well. Doc sprocket and I have talked out an idea for a solid axle FNR build that will let me run normal 3/4 axle rims.

Man- you pulled that out in short order. Way to go! Love the unique driveline. Later on? 4x4, and *POOF* Rockcrawling domination!

***Get YOUR official "Doc Locked, And Ready To Rock!" Stickers by clicking here!***
***Official Sprocket's Garage vinyl graphics and tees for sale HERE!***

Maine Mud Mower's "Not the Norm" [2016 Build-Off Finalist] - Page 3 Facebo12

Put down the wrench, and come out with your hands up!-Doc "Tranny Crusher" Sprocket, ATLTF Forum Admin, Thinkerer and Tinkerer, and all-around good dood. Wink

Gen. Mayhem- https://www.atltf.com/t2597-general-mayhem-race-tractor
MULE- https://www.atltf.com/t2153-lawn-boy-utltv
MULEII- https://www.atltf.com/t3328-1970-john-deere-112-the-beginnings-of-mule-ii
MULEIII https://www.atltf.com/t4263-mule3-brainstorming-ideas-etc#58287
Wrench, Wheel, Wreck, Repeat...

love the concept, definately different, gotta get them pullies swapped, GOOD LUCK!

» Tractorhead's Roper Romper [2016 Build-Off Finalist]
» Chase Towns's Daisy FMC [2016 Build-Off Finalist]
» TSCUSTOMS Dirty Burban [2016 Build-Off Finalist]
» redzz02 Drift Missile [2016 Build-Off Finalist]
» Mr.Modified's Simplicity Adventure Edition [2016 Build-Off Finalist]