Toro Racing/Wheelie machine

Had a frame with no engine and a spare engine so i put them together to make this. I know the engine is a bit overpowered but oh well lol



I need to figure out how to build a seat for it because the motors to big for the old seat to go on it but i don't mind. i want it to be easy to work on so taking that seat off opens it up more.

Over head view The engine runs to a tranny then the tranny runs to the axle. Its a 4 speed with reverse


Red neck kill switch a wire from the coil that i will ground with my hand to shut it off don't worry its only temporary

And more redneckness zip ties holding the gas tank and throttle/choke cables again only temporary. it needs a link in the chain but i temporarily fixed that with wire lol came apart 5mins later

You copyed my mind, if i ever got my grimy hands on a rer, then id do exatly this. put a seat on that thing and try not to kill yourself.

Im going to start coming up with ideas tomorrow for a seat while i wait for cub parts to show up. And i was driving it standing up lol im impatient and if i dont post ever again theres a good chance i killed myself on it lol

Redneck-Lawnchair. *poke*    Legitimate reason, seat doesn't fit back on!

LAWN MOWER MUDDER wrote:

Redneck-Lawnchair. *poke*    Legitimate reason, seat doesn't fit back on!

I should do what 1puglife does and use a lawn chair as a seat lol

Craftsman1998 wrote:

LAWN MOWER MUDDER wrote:

Redneck-Lawnchair. *poke*    Legitimate reason, seat doesn't fit back on!

I should do what 1puglife does and use a lawn chair as a seat lol

That is what I meant....

LAWN MOWER MUDDER wrote:

Craftsman1998 wrote:

LAWN MOWER MUDDER wrote:

Redneck-Lawnchair. *poke*    Legitimate reason, seat doesn't fit back on!

I should do what 1puglife does and use a lawn chair as a seat lol

That is what I meant....

Thanks for the idea i think i might do that i just need to buy a lawn chair

You can usually find then at yard sales for really cheap. LOL

how many gears dose the 700 have

kawasaki220 wrote:

how many gears dose the 700 have

4 with reverse

Man ant it so annoying when the engine has too much power! LOL!

Made a seat for it

Should extend the steering wheel, for better comfort. I was LOLing big times at the first sight of that.  Do you also plan on locking the diff? If you do then you should add a wheelie bar!

it has a live axle so theres nothing to lock

i didnt know that, that had a live axle

kawasaki220 wrote:

i didnt know that, that had a live axle

Yep it has a live axle ill make a video of the setup soon

Mitch'sgarage wrote:

sweet, that is going to need a wheelie bar so you can ride wheelies for blocks! Is it pulley swapped?

i am going to pulley swap it. it isn't pulley swapped yet it needs a chain first before i pulley swap it. i want to make sure everything works right. And i'm going to make a wheelie bar i just haven't done it yet. i want to make sure it can do wheelies before i make one.

i need to measure the pulleys to see what the ratio is so i know what size pulleys to get. what sizes would be good for wheelies?

1:1 will give you wheelies all depends what gear you wanna do wheelies in :p but I suggest a large diameter pulley so you get really good belt grip

Moose wrote:

1:1 will give you wheelies all depends what gear you wanna do wheelies in :p but I suggest a large diameter pulley so you get really good belt grip

ok thanks. if i had to guess it has a 4 on the engine and a 5 on the tranny but i'm not sure need to measure them

Craftsman1998 wrote:

Moose wrote:

1:1 will give you wheelies all depends what gear you wanna do wheelies in :p but I suggest a large diameter pulley so you get really good belt grip

ok thanks. if i had to guess it has a 4 on the engine and a 5 on the tranny but i'm not sure need to measure them

4" on the motor and 5" on the back would be good.  I wouldn't go any bigger than that for a stock peerless 700. I would change the sprockets on the axle.  What size sprocket is on the axle??

LAWN MOWER MUDDER wrote:

Craftsman1998 wrote:

Moose wrote:

1:1 will give you wheelies all depends what gear you wanna do wheelies in :p but I suggest a large diameter pulley so you get really good belt grip

ok thanks. if i had to guess it has a 4 on the engine and a 5 on the tranny but i'm not sure need to measure them

4" on the motor and 5" on the back would be good.  I wouldn't go any bigger than that for a stock peerless 700. I would change the sprockets on the axle.  What size sprocket is on the axle??

I dont know what size sprocket it has how do i check do i measure it or what?